Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: mrgstiffler on November 03, 2010, 01:07:01 am
-
Does this motherboard support SATA port multipliers like this one:
http://www.cdw.com/shop/products/default.aspx?EDC=1291044
-
*
No because this card is only :
Compatible with Host Controllers using the SiI3124 and SiI3132 chipset.
But you can use with 4 * disks this ( config is compltly independant switcheable RAID 0,1,10,5 ) i use 4 * similar adaptators in RAID 10
http://www.addonics.com/products/host_controller/ad4sr5hpmus.asp
only a little problem because you can use <= 2TO RAID ( i have in RAID 10 4*1TO disks and no problems )
Speed is very good some 160Mo/s in sata
Use only one sata port or also USB
Pierre
-
Thanks for the quick reply! That looks like exactly what I want. Not a ton of information, but you say it's limited to 2TB arrays? The site says it does RAID-5 with 4 disks... I assume it works with only 3 disks as well? 3 1TB drives in RAID5 should work then.
-
*
Exist also SPM394 based adapter similar to Addonics product but with LCD / Buttons for configuration
http://www.ioisata.com/products/Port-Multiplier/SPM394.htm
I think that also limitation is with >= 2TO Array
Pierre
-
*
Exist also SPM394 based adapter similar to Addonics product but with LCD / Buttons for configuration
http://www.ioisata.com/products/Port-Multiplier/SPM394.htm
I think that also limitation is with >= 2TO Array
Pierre
Thanks. I went ahead and ordered that Addonics one. I'm going to remove the the case retention piece and mount it in a project box. It should work out perfectly for my case and needs.
-
*
I use an old Tower for 9 * CDROM + SCSI with 2 Addonics adaptaters !!
(http://img261.imageshack.us/img261/3119/imgp1853.jpg)
Pierre