Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: Soupy on November 20, 2010, 04:01:34 am

Title: TMPIN0, TMPIN1, TMPIN2 GA-890GPA-UD3H ?
Post by: Soupy on November 20, 2010, 04:01:34 am

Im running CPUID Hardware Monitor and would like to know if anyone can tell me what these temerature reading belong to? Im guessing that TMPIN0 is the System (case) temp, TMPIN1 is the CPU temp, and TMPIN2 is Northbridge temp. Can anyone confirm this?

Any infor on FANIN 0,1, & 2 too would be great.

Thank You

Title: Re: TMPIN0, TMPIN1, TMPIN2 GA-890GPA-UD3H ?
Post by: bytheway_r on November 20, 2010, 11:21:34 pm

If you could give us a screenshot it'd be much easier. Otherwise it's hard to tell, unless someone here has the same board as you.

It's mostly guessing based on what you know about your PC, anyway. At least, that's how I figured out all the sensors and fans.

Title: Re: TMPIN0, TMPIN1, TMPIN2 GA-890GPA-UD3H ?
Post by: blackie on November 21, 2010, 03:38:22 am

One of the easiest ways to correlate temps and fans is to reboot into the BIOS and check the system temps and fan speeds (write them down as to what corresponds to what). Then finish booting and rerun your monitor program. Match up the readings with the BIOS readings and you should be ble to match them up.