Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: TLCH723 on January 10, 2011, 06:02:33 pm

Title: Onboard LED
Post by: TLCH723 on January 10, 2011, 06:02:33 pm

Is there a way to disable the onboard led so it doesnt lit??
I just want the freq. led to disable.
Its too bright at night when I am sleeping.

I have the x58a-ud3r.

Title: Re: Onboard LED
Post by: Dark Mantis on January 10, 2011, 08:07:29 pm

I don't think that there is any way to disable the LEDs but if you just go over it with a black marker pen it would certainly make it a lot duller.

Title: Re: Onboard LED
Post by: TLCH723 on January 10, 2011, 10:30:40 pm

The multi use of a sharpie.

I have another question.
The CPU temp. LEDs. The green one. Wat temp does it represent??
I know the temp is safe at the green one.

Title: Re: Onboard LED
Post by: Dark Mantis on January 11, 2011, 01:12:47 pm

I am afraid we don't have access to the technical specifications so I can't answer that for you. I think your best course of action would be to ask GGTS.

Just enter your email address and click on the language of choice.
GGTS   http://ggts.gigabyte.com.tw/Default.aspx

Title: Re: Onboard LED
Post by: F5BJR on January 11, 2011, 02:21:20 pm

*
Look your manual :

http://download.gigabyte.eu/FileList/Manual/mb_manual_ga-x58a-ud3r_e.pdf

I have see 1.8 page 22

Off: Below 60°C
L1: 61~ 80°C (green)
L2: Over 80°C (red)

Pierre

Title: Re: Onboard LED
Post by: Dark Mantis on January 11, 2011, 02:30:14 pm

You are quite right Pierre, my bad! I didn't remember seeing it in the manual....probably because it is the only bit of actual data there.