Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: joesat on January 17, 2011, 10:16:11 pm

Title: Gigabyte D525T-UD Mini-ITX motherboard
Post by: joesat on January 17, 2011, 10:16:11 pm

Gigabyte D525T-UD Mini-ITX  did not find ddr3 800 memory anywere so have got ddr3 1600 how do i underclock them in the bios i bought     Kingston 4GB (2x2GB) DDR3 1600MHz HyperX  will these be ok on this mob                    

Title: Re: Gigabyte D525T-UD Mini-ITX motherboard
Post by: Dark Mantis on January 18, 2011, 07:26:23 am

Hi and welcome to the Gigabyte Forum.

Can you check your model number please as our system isn't recognising it?

Also the revision number of your motherboard would be helpful.

Title: Re: Gigabyte D525T-UD Mini-ITX motherboard
Post by: runn3R on January 18, 2011, 03:40:46 pm

Hi Dark Mantis, I think joesat talks about this one:
http://uk.gigabyte.com/products/product-page.aspx?pid=3549#ov

Title: Re: Gigabyte D525T-UD Mini-ITX motherboard
Post by: Dark Mantis on January 18, 2011, 03:58:17 pm

Thanks runn3R.  ;)

Title: Re: Gigabyte D525T-UD Mini-ITX motherboard
Post by: Dark Mantis on January 18, 2011, 04:31:27 pm

Well it will be a bit of overkill but the memory should work ok at the slower speed without any problems.

Title: Re: Gigabyte D525T-UD Mini-ITX motherboard
Post by: joesat on January 18, 2011, 09:47:05 pm

do i need to alter anything in the bios when  instal this memory  or will it just boot ok without ajustment thanks joesat

Title: Re: Gigabyte D525T-UD Mini-ITX motherboard
Post by: Dark Mantis on January 18, 2011, 10:00:49 pm

As long as the Kingston memory that you have bought is 1.5v it should just work at the 800 speed. If not you will need to adjust your settings manually in the BIOS.

Title: Re: Gigabyte D525T-UD Mini-ITX motherboard
Post by: joesat on January 27, 2011, 02:39:11 pm

memory was ok pity the the harddrive was DOA waiting for  ebuyer to return new one then will restart build

Title: Re: Gigabyte D525T-UD Mini-ITX motherboard
Post by: Dark Mantis on January 27, 2011, 04:52:09 pm

Normally Ebuyer are very good and don't keep you hanging around long. At least you got to the bottom of it.  ;)