Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: younes1366 on January 28, 2011, 09:28:10 pm

Title: onboard DisplayPort-GA-H57M-USB3
Post by: younes1366 on January 28, 2011, 09:28:10 pm

hiiiii.
im building new pc with GA-H57M-USB3 and intel i5 760.
in motherboard manual written:
To use the onboard DisplayPort, HDMI, DVI-D, and D-Sub ports, you must install an Intel CPU with integrated graphics.
.....
what is mean Intel CPU with integrated graphics ?
and  intel i5 760 is enught to use onboard graphic?
...........................................................................
and please advise best ram for this motherboard?
and can ram be 1.65v?
..........
thanksssss

Title: Re: onboard DisplayPort-GA-H57M-USB3
Post by: Dark Mantis on January 28, 2011, 09:52:45 pm

Hi

No I am sorry but your i5 760 doesn't support onboard graphics. Just because it is one of the more powerful chips doesn't make it a graphics supporting chip.

Certain models of CPU have the graphics capabilities and others dont. You need to check up with Intel's list to see which ones do.

The memory must be 1.5v for this board.

Title: Re: onboard DisplayPort-GA-H57M-USB3
Post by: younes1366 on January 28, 2011, 10:12:16 pm

tnx for fast replyyy

do i need to buy graphic card now with this cpu?
if you see gigabyte site the memory with suit for this motherboard you can see :
Kingston 2GB KHX2133C9D3T1K2/4GX is available and when i wanted to buy its writeen its 1.65v ram.
please cheak:

http://uk.gigabyte.com/products/product-page.aspx?pid=3307#sp ------------------------- it say only use 1.5v and gives
model of 1.65 ram suppourted....

which is :

http://www.newegg.com/Product/Product.aspx?Item=N82E16820104143

...............
what to do with ram an dgraphic tnxxxxxxxxxx

Title: Re: onboard DisplayPort-GA-H57M-USB3
Post by: younes1366 on January 28, 2011, 10:24:23 pm

sorry link is dead..
please this link which says in memory part that:

To reach DDR3 2200 MHz and above, you are required to use with Intel Core i7/Core i5 CPU without HD Graphics and install a discrete graphics card.
When using Intel Core i5/Core i3/ Pentium CPU with HD Graphics, the maximum memory speed supported is 1666 MHz
* Go to GIGABYTE's website for the latest memory support list.

please download pdf ..list of supported ram for this motherbnoard
vhttp://download.gigabyte.ru/memory/mb_memory_ga-h57m-usb3.pdf
... you can see many ram with 1.65v ....

what to buy finally ?

Title: Re: onboard DisplayPort-GA-H57M-USB3
Post by: younes1366 on January 28, 2011, 10:26:11 pm

http://download.gigabyte.ru/memory/mb_memory_ga-h57m-usb3.pdf

Title: Re: onboard DisplayPort-GA-H57M-USB3
Post by: Dark Mantis on January 28, 2011, 10:32:19 pm

Some memory that is rated at 1.65v will actually run quite happily at 1.5v but not all will.

To be safe I wouls recommend purchasing some modules that are rated at 1.5v and compatible with this motherboard's chipset.

Yes you will need to purchase a discrete graphics card to go with that CPU.

Title: Re: onboard DisplayPort-GA-H57M-USB3
Post by: younes1366 on January 28, 2011, 11:40:46 pm

tnx alot...
any graphic card which is good for this system.... most to get HDMI 1080P quility movie.
tnxxxx.. for mid tower case..

 

Title: Re: onboard DisplayPort-GA-H57M-USB3
Post by: Dark Mantis on January 29, 2011, 09:39:13 am

Any of the newer graphics cards should do what you want with movies etc.