Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: texasbiggs on February 06, 2011, 12:58:31 am

Title: GA-880GA-UD3H No core temps reported
Post by: texasbiggs on February 06, 2011, 12:58:31 am

Just installed AMD Phenom II X2 560 Black Edition and all went well except when unlocked cores all 4, no temp is reported.
I tried a number of programs but no core temps reported.  Turn it back to 2 cores and it reports fine.

It seems to run real cool, heat sink cool to touch on Hyper 212.  Got a little warmer at 3.5hz and 4 cores but don't want to push it without core temps.

Any ideas????

Install went great...

AMD Phenom II X2 560 Black Edition
GA880-UD3H
Antec 550 PS
4G Corsair 1600 memory
LG DVD RW

Title: Re: GA-880GA-UD3H No core temps reported
Post by: absic on February 06, 2011, 09:51:15 am

Hi there,

What programmes have you tried for checking your Core Temps?

Title: Re: GA-880GA-UD3H No core temps reported
Post by: bytheway_r on February 06, 2011, 02:56:56 pm

To put it bluntly - it's normal.

It's just one of the trade-offs with unlocked CPUs. Just use your CPU temp when overclocking. Phenom II CPUs overclock properly till about 55 degrees and that's below their max temp which for quads is about 65 degrees.

All in all, I think you'll be fine up to about 1.45v on the CPU.

Title: Re: GA-880GA-UD3H No core temps reported
Post by: texasbiggs on February 06, 2011, 10:20:38 pm

Thanks for the replies.  It does appear that this is quite common.
I used a number of programs incliding AMD overdrive,speedfan, real temp and others.

I have had it up to 3.8 and ran Prime 95 for 30 minutes.   It seemed that the video chips got hotter than CPU.
I do not have a cooler on video chips.

I got lucky with a good chip.

Thanks again.