Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Bugler on February 27, 2011, 06:58:28 pm

Title: New build GA-H55M-USB3 rev2 -- no post, no video, no beep
Post by: Bugler on February 27, 2011, 06:58:28 pm

Friendly Gigabyters  ;D

I have a new build with the following specs:
  Antec 550W PS
  GA-H55M-USB3 Rev2.
  EVGA GT 240
  1TB HD
  SATA DVD Burner
  Case.

Mounted everything in case.  No post, No Beep, No Video.
  Fans work, phase lights work.

What I have done:
  I have taken EVERYTHING OUT OF case.  placed on non conductive cardboard and started from scratch.
  Mounted CPU and stock cooler only.
  Cleared CMOS
  Removed CMOS batter for 30 minutes, replaced, cleared CMOS
  Changed speaker.
  Plugged in power on mobo, plugged in power cord.
RESULT NO BEEP.
  Mounted PCI Video  RESULT same and no video.
  Mounted 1 stick Ram 2 x 2GB XMS3 corsair in DDR3_1 slot (first white slot from CPU)  RESULT SAME.

Removed CPU and cooler.  Looked at pins in socket.  Did not see any pins bent.

I can't get this thing to even POST a little bit.  Any suggestions?

Title: Re: New build GA-H55M-USB3 rev2 -- no post, no video, no beep
Post by: Dark Mantis on February 27, 2011, 09:16:58 pm

Hi and welcome to the Gigabyte forum.

Let's try the obvious first. Have you made sure that all the power plugs are inserted properly? That is the 24 pin, the 8 pin beside the CPU, and the 6 or 8 pin on the graphics card ?

Title: Re: New build GA-H55M-USB3 rev2 -- no post, no video, no beep
Post by: Bugler on February 27, 2011, 09:23:52 pm

I have.  24 +4 is plugged in properly and 6 pin plugged in by cpu.  Gt 240 does not have external power.

What else ya got? :)

Title: Re: New build GA-H55M-USB3 rev2 -- no post, no video, no beep
Post by: Dark Mantis on February 27, 2011, 09:28:32 pm

Well it should have the 8 pin plugged in really as it won't be stable  or maybe even start without. You can get an adapter for a molex connector if your PSU only has a 4 pin.

You don't say what processor you have installed so I can't check if it is supported by your BIOS version which is ?

Title: Re: New build GA-H55M-USB3 rev2 -- no post, no video, no beep
Post by: Bugler on February 27, 2011, 09:35:18 pm

Sorry.  Didnt list.  I5-760.  Mobo is rev2  whuch should have at min F7 which supports i5-760.

I'm pretty sure power next to cpu is 6 and no option for 8.  Video card I looked around to double check and couldnt find power for it.  I will be home in 30 will triple check.

Title: Re: New build GA-H55M-USB3 rev2 -- no post, no video, no beep
Post by: Dark Mantis on February 27, 2011, 09:42:35 pm

OK. My info says 8 pins for the EPS power on the rev 2.0.

It would appear that the rev.2.0 mobo comes as standard with F7 BIOS so that shouldn't be a problem but it might be just as well to check.

Title: Re: New build GA-H55M-USB3 rev2 -- no post, no video, no beep
Post by: Bugler on February 27, 2011, 10:04:34 pm

Ok just checked. It does have an 8 pin power.  I was going from memory as I was mobile.

What else do ya have?

Title: Re: New build GA-H55M-USB3 rev2 -- no post, no video, no beep
Post by: Dark Mantis on February 27, 2011, 10:10:44 pm

I don't think I need anything else dude! I reckon if you fill the 8 pin connector it should work. ;)

Title: Re: New build GA-H55M-USB3 rev2 -- no post, no video, no beep
Post by: Bugler on February 27, 2011, 10:30:02 pm

Just bought a GA H55M-s2v.  I will see if this works.