Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: La7gla on February 28, 2011, 01:37:50 pm

Title: GA-870A-UD3 hangs in POST after loading cpu
Post by: La7gla on February 28, 2011, 01:37:50 pm

I have the Gigabyte GA-870A-UD3. And on could boot in "post meny" its hang. A solution is to take out all usb (2) memoristick external hd. I realy dont know wath the problem is.

This is a big problem for me . I have a lot off usb hd and memoristick

Please help  :)

Amd ph2 965
Kingstone 12gb ram
corsair h50

Jan-Ivar

Title: Re: GA-870A-UD3 hangs in POST. after loading cpu
Post by: jolphil on February 28, 2011, 01:57:10 pm

If I read your post correctly ..The system fails to boot with the USB sticks inserted..If so did you install the latest windows driver for USB?
jolphil

Title: Re: GA-870A-UD3 hangs in POST after loading cpu
Post by: Dark Mantis on February 28, 2011, 09:08:15 pm

Make sure that you have Legacy USB Devices enabled in the BIOS.

Title: Re: GA-870A-UD3 hangs in POST after loading cpu
Post by: el_Paraguayo on March 01, 2011, 12:52:23 pm

My board would not boot when my iPod was plugged in to a USB socket.

I think this was because I had USB above my hard drives in the boot order, so I assume it was looking at the iPod, not finding a boot record, but then not moving on to hard drives.

Assuming you're not booting from these devices, you could try changing the boot priorities.

Title: Re: GA-870A-UD3 hangs in POST after loading cpu
Post by: La7gla on March 01, 2011, 02:17:47 pm

I've tried to change the bot in the bios setup. Both with and without usb. No change. I also have the same problem with my ipod. I'll try Dark Mantis solusjon.

jolphil      I've downloaded the latest drivers. So I do not think the problem lies there.

Title: Re: GA-870A-UD3 hangs in POST after loading cpu
Post by: jolphil on March 01, 2011, 08:28:12 pm

Hi,
I just noticed in your post you state you have 12 gb of RAM..Is that a typo or do you have unmatched sticks in your motherboard..
Can you clarify your RAM..
Jolphil :)

Title: Re: GA-870A-UD3 hangs in POST after loading cpu
Post by: La7gla on March 08, 2011, 02:29:03 pm

Quote from: Dark Mantis on February 28, 2011, 09:08:15 pm

Make sure that you have Legacy USB Devices enabled in the BIOS.

Solved :-)  Thanks

Title: Re: GA-870A-UD3 hangs in POST after loading cpu
Post by: Dark Mantis on March 08, 2011, 02:36:46 pm

Yes it is often just down to that little setting.  ;)