Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Lebon14 on April 22, 2011, 05:50:52 am
-
Hi!
Back in late October 2010, I built myself a nice Core i7 machine with a Gigabyte X58A UD3R and triple channel Corsair XMS3 RAM clocked at 1333MHz (9-9-9-24).
Here is the kit I bought :
http://www.newegg.ca/Product/Product.aspx?Item=N82E16820145220
But looking in my BIOS, it's running at 1066MHz and 8-8-8-20, 1.5v. Is there a way to "overclock" the RAM so it runs at its factory settings (run them at 1333MHz, 9-9-9-24, 1.5v)?
Here are pictures of my settings :
Advanced Memory settings : http://i28.photobucket.com/albums/c210/lebon14/DSCF1235Copier.jpg
M.I.T. Current Status : http://i28.photobucket.com/albums/c210/lebon14/DSCF1239Copier.jpg
Note that I never overclock my computer. So I don't have any experience modifying those settings.
Help?
-
Yes, all you have to do is manually set the memory multiplier to x10 (Then also set Uncore to x20-22)
Then manually set the memory timings to what you want for each channel, you will need to set Dram Timing Selectable SPD to Expert to adjust the memory timings.
-
Thanks for the help.
I have to overclock my CPU to Uncore 20-22x to put my RAM @ 1333MHz?!
Anyway, where is the Uncore setting?
-
Hi
The Uncore setting can be found in the MIT section
-
Everything is setup and running at the supposed RAM timing. Thanks for the help!
-
Good news! ;D