Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: appache on May 28, 2011, 08:46:48 pm

Title: M68MT-D3/PhenomII X2 555
Post by: appache on May 28, 2011, 08:46:48 pm

Have M68Mt-D3 Rev-2.3 & a Phenom X2 555
When i enter CMOS and enable CPU Unlock and restart powers on and no post.
If i restart,and disable Unlock,will post.

Would a Bios flash help ? Anyone else run into this ?

Title: Re: M68MT-D3/PhenomII X2 555
Post by: Dark Mantis on May 28, 2011, 08:52:33 pm

hi

I am not sure if a BIOS update would cure this particular issue but it certainly wouldn't hurt and so you might as well go ahead and flash it. Make sure that you use QFlash though not @BIOS.

Title: Re: M68MT-D3/PhenomII X2 555
Post by: absic on May 29, 2011, 08:58:24 am

Hi there,

As DM says updating to the F3B BIOS might help but I think you really should contact Gigabyte Technical Support to confirm if your processor is actually compatible with this board as it doesn't appear on the CPU support list. Check here: http://www.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=3497 This doesn't mean that it isn't supported it might just be that the CPU list hasn't been updated.