Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: drake008 on August 06, 2011, 01:41:37 am

Title: P35DS4 updating AhcI,RAID and JMB
Post by: drake008 on August 06, 2011, 01:41:37 am

Is there a way to update all of these three roms in the bios to the latest installments?

So I far I just found the 11.0.0.1124.BiN file. Which could be the RAID Option from Intel.

The newest Option for the JMB is here ftp://driver.jmicron.com.tw/SATA_Controller/Option_ROM/jmb363_1.07.28.zip

Just the AHCI is nowhere to be found.

Also how can I integrate them properly via cbrom in the p35ds4.f14 file.

Title: Re: P35DS4 updating AhcI,RAID and JMB
Post by: Dark Mantis on August 06, 2011, 08:54:59 am

Hi

They are all updateable obviously. The RAID and AHCI firmware is the same and probably the IRST file from Intel is the best for that.

Title: Re: P35DS4 updating AhcI,RAID and JMB
Post by: drake008 on August 06, 2011, 07:50:43 pm

So where to find this IRST file and how to integrate it into the Biosfile.

Title: Re: P35DS4 updating AhcI,RAID and JMB
Post by: Dark Mantis on August 06, 2011, 09:29:19 pm

IRST is downloadable from the Intel website and it doesn't  need to be integrated into the BIOS just run.

Title: Re: P35DS4 updating AhcI,RAID and JMB
Post by: drake008 on August 06, 2011, 10:41:57 pm

So this is just the driver.

I asked for help to integrate a NEwEr Bios revision into the Bios so that the performance in AHCI mode is better when there is load on the hdds.

Title: Re: P35DS4 updating AhcI,RAID and JMB
Post by: F5BJR on August 06, 2011, 11:55:09 pm

*
I have tested some new Options Rom with my GA-X58A-UD5 and not found many performance updated ( only some problems because the INTEL version 9 or 10 are big and i cannot use normall my HighPOint add-on cards )

For modify your BIOS you can use CBROM32 but

**  do not think you will win much apart from the risk of bricked upur motherbaord card with a bad BIOS **



Pierre