Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: jebyrne on September 03, 2011, 11:11:52 am

Title: GA-X58-USB3 Motherboard and Bios F5C
Post by: jebyrne on September 03, 2011, 11:11:52 am

I have a Silicon Image RAID card (SiI3132) installed on my GA-X58-USB3 motherboard that performed without any problems with BIOS versions previous to F5C.  The card's boot ROM would appear after the motherboard SATA HDD detection with the usual configuration options.  With F5C the card's ROM is skipped (there is just a flash of a warning message to this effect).  I know that this is a beta BIOS version, but will this fault be sorted in the next BIOS release with Dolby Home Theater?

Title: Re: GA-X58-USB3 Motherboard and Bios F5C
Post by: Dark Mantis on September 03, 2011, 11:25:57 am

Hi and welcome.

I would suggest making sure by informing GGTS of the problem so there is no reason to miss it out.

Just enter your email address and click on the language of choice.
GGTS   http://ggts.gigabyte.com/

Please expect several days for a reply.

Title: Re: GA-X58-USB3 Motherboard and Bios F5C
Post by: F5BJR on September 03, 2011, 12:32:45 pm

*
The BIOS F5C use a BIG INTEL OPTION Rom 10.6.0.1091 absolutly not compatible with add-on cards

Reinstall old BIOS with INTEL Option ROM 8.9.0.1023 ( last compatible )

Pierre

Title: Re: GA-X58-USB3 Motherboard and Bios F5C
Post by: Dark Mantis on September 03, 2011, 01:54:50 pm

Thanks for clearing that up Pierre ;)

Title: Re: GA-X58-USB3 Motherboard and Bios F5C
Post by: jebyrne on September 04, 2011, 09:58:59 am

Thanks for your help.   I have gone back to Bios F5A with no problems.  The new Intel ROM firmware seems a retrograde step if it no longer supports add-in cards.

Title: Re: GA-X58-USB3 Motherboard and Bios F5C
Post by: Dark Mantis on September 04, 2011, 11:10:27 am

The usual two steps forward and then one step backwards again! Seems to happen everywhere. :-\