Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Pally on September 05, 2011, 10:53:32 am

Title: How to connect case 3+1 Pin USB to gigabyte P43T-ES3G motherboard?
Post by: Pally on September 05, 2011, 10:53:32 am

I have two wires each with VCC Data- Data+ and separate black ground wire. How do i connect these to the motherboard correctly?

Title: Re: How to connect case 3+1 Pin USB to gigabyte P43T-ES3G motherboard?
Post by: Dark Mantis on September 05, 2011, 11:10:08 am

Hi and welcome.

Can you just confirm exactly where these two wires come from ? Also what case are we talking about ?

Title: Re: How to connect case 3+1 Pin USB to gigabyte P43T-ES3G motherboard?
Post by: Pally on September 05, 2011, 11:37:53 am

They are coming from the case front usb that i want to use, im not sure what case it is, its 4 years old spire.

Title: Re: How to connect case 3+1 Pin USB to gigabyte P43T-ES3G motherboard?
Post by: Dark Mantis on September 05, 2011, 02:27:07 pm

If you check your manual (RTFM) on page 28 you will find a diagram of the motherboard USB 2.0 pinouts. Just in case you don't have yuour manual to hand you can read it here :

http://download.gigabyte.eu/FileList/Manual/mb_manual_ga-g41m-es2l_e.pdf