Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: jayendra on October 10, 2009, 09:30:45 am
-
I have just installed into an Antec Case
CPU: AMD AthlonII x2 240
Motherboard: Gigabyte MA785GM-US2H
RAM: 4GB Kit Kingston DDR2 800Mhz
Case: Antec NSK2480 w/ 380W PSU
GPU: Integrated
PSU: With Case (80+ certified)
2 x Sata HDD
DVD drive
I can't get anything to show up on screen - Everything is on - lights and fans but no display. I've tried a seperate pcie video card and on board and 2 different cables and monitors.
Please Help!!!
-
Hi,
Any beeps from Post?
Try assemble it outside case and test with just the one stick ram, hdd, and video card plugged in,
any post beeps,
regards
-
The case doesn't have any speakers - does the motherboard have a speaker?
I will try assemble outside case post back in 10 mins
-
Hi
I think the speaker connections are on the multi pinouts on the bottom righthand side 4 pins coloured red! check your manual,
-
silly me - didn't plut the cpu power in :)
-
Hi,
Glad you got it sorted,
regards
-
I did the same thing.