Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: runn3R on October 04, 2011, 03:21:19 pm

Title: CPU-Z can't read CPU Vcore correctly on Z68 motherbards
Post by: runn3R on October 04, 2011, 03:21:19 pm

Full info is here:
http://forum.giga-byte.co.uk/index.php/topic,6967.msg54859.html#msg54859

Title: Re: CPU-Z can't read CPU Vcore correctly on Z68 motherbards
Post by: FoLmEr on October 07, 2011, 10:13:28 am

Reports the same for me as v1.58 on z68x-UD4-B3.

Title: Re: CPU-Z can't read CPU Vcore correctly on Z68 motherbards
Post by: runn3R on October 07, 2011, 10:56:19 am

Hi

Which bios version do you have?
What are the voltage readings from CPU-Z, HardwareMonitor and EasyTune6 (or TouchBIOS) - just to compare?
Is your system OC'd - if yes then what are BIOS settings?

Title: Re: CPU-Z can't read CPU Vcore correctly on Z68 motherbards
Post by: FoLmEr on October 07, 2011, 11:27:43 am

F8 official BIOS (not modded)
ATM I'm using DVID +.070v @ 4.6GHz, 2600K
HWmonitor says 1.07
CPU-Z (1.58.5) says 1.056-1.068
CPU-Z (1.58) says the same
TouchBIOS has decided it had better things to do than to start so I'm afraid I can't be of any help there. God damn crappy software.
I don't have ET6 installed atm but I haven't noticed any descrepencies between what ET6 reports and what CPU-Z reports in the past.

Title: Re: CPU-Z can't read CPU Vcore correctly on Z68 motherbards
Post by: ex58 on October 07, 2011, 12:44:15 pm

CPU-Z 1.58.6 Beta (http://www.fileden.com/files/2010/4/14/2827595/cpuz_1.58.6.zip)

 ;D

Edit:

GA-Z68X-UD7........OK.

(http://i8.aijaa.com/b/00249/8829912.png)

Title: Re: CPU-Z can't read CPU Vcore correctly on Z68 motherbards
Post by: ex58 on October 07, 2011, 05:32:05 pm

CPU-Z 1.58.7 Beta (32-bit) (http://www.fileden.com/files/2009/12/20/2696817/cpuz_1587_32.zip)
CPU-Z 1.58.7 Beta (64-bit)  (http://www.fileden.com/files/2009/12/20/2696817/cpuz_1587_64.zip)

 :o

Title: Re: CPU-Z can't read CPU Vcore correctly on Z68 motherbards
Post by: runn3R on November 23, 2011, 10:00:30 am

The final version 1.59 available at:
http://www.cpuid.com/softwares/cpu-z.html

Title: Re: CPU-Z can't read CPU Vcore correctly on Z68 motherbards
Post by: Gloup_Gloup on November 23, 2011, 11:11:45 am

Hi runn3R,  ;)

Thank you for the new link and version CPU-Z.

Gloup_Gloup