Official GIGABYTE Forum
		Questions about GIGABYTE products => All other GIGABYTE products => Topic started by: iainr on October 05, 2011, 08:22:38 pm
		
			
			- 
				Hi Guys
 
 I've got a GA-EP45t-UD3LR running Windows 7 64 bit and i have it rigged to my home cinema system through the onboard s/pdif out connection. I've updated the realtek driver to the latest, I have set it to 2 channel with 44.1/48Khz output with spdif set as default. I got sound a couple of times after cold boots but it only lasted a minute or so and then nothing.
 
 Any help would be great
- 
				Hi and welcome.
 
 Check in Device Manager and see if there are any exclamation marks especially beside the sound card. If so you have a problem with it.
- 
				I've done that cheers. It seems as if its working but i don't get any sound! It has me baffled
			
- 
				Double check all your connections and make sure that you haven't got the "Mute" button selected.
			
- 
				checked and tested, still nothing.
			
- 
				Are you sure that you are using the correct connections ?
			
- 
				pretty sure. sound system has optical in, pc has optical out and i've got a optical cable to connect the 2, I've also had my old sound system connected via audio jack and i still don't get any sound.
			
- 
				Offhand then I can't think of anything but if something comes to mind I will post again. ;)
			
- 
				yeah no bother mate, it has me stumped! I've ordered a cheap sound card the day so i hope that may sort it. Thanks for the help
			
- 
				The only thing I can suggest is going through all the options in the audio side of things in the Control Panel as there are some well hidden options.
			
- 
				yeah been through all that over the last couple of days. i hope this sound card that comes the morra sorts it. if not then i'm out of ideas!