Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: SGT BASHIR on November 15, 2011, 08:03:26 pm

Title: GA-EX58A-UD7 rev 1.0 bios issue
Post by: SGT BASHIR on November 15, 2011, 08:03:26 pm

Have a problem with the bios issue. My mobo will not boot. The bios on my board must be F2, but in order for my pc to boot up the bios needs to be F8M  >:( . No way to flash the bios on my motherboard without an i7 920 cpu. Need to send it back to Gigabyte UK RMA department so they can update the bios. Does anybody have the correct e mail address for them as the one I was given is wrong??? pls help

Title: Re: GA-EX58A-UD7 rev 1.0 bios issue
Post by: Dark Mantis on November 15, 2011, 08:07:57 pm

Hi anmd welcome.

It might be better to just take it to yopur local computer shop and get them to fl;ash the BIOS for you. OK will cost a few pounds I expect but much quicker and more convenient. A 950 CPU would work just as well as a 920.

If you want to contact the RMA dept though :


returns@gbt-tech.co.uk          RMA section UK