Official GIGABYTE Forum

Questions about GIGABYTE products => All other GIGABYTE products => Topic started by: bajdec on November 27, 2011, 05:58:24 pm

Title: Gigabyte U7300 and Windows XP SP3 problem
Post by: bajdec on November 27, 2011, 05:58:24 pm

Hello!

I have U7300 and cannot install drivers on WIndows XP. When I try to install it, shows up blank windows without title and nothing happens. Under Win7 works flawless. Anybody had/has the same problem?

Please help!
Thanks.

Title: Re: Gigabyte U7300 and Windows XP SP3 problem
Post by: Gloup_Gloup on November 28, 2011, 07:43:20 am

Hi bajdec,

Just for infos :

TV Tuner Dongle U7300
http://www.gigabyte.com/products/product-page.aspx?pid=3493#ov

Manual Page:
http://www.gigabyte.com/products/product-page.aspx?pid=3493#manual

Download Drivers page:
http://www.gigabyte.com/products/product-page.aspx?pid=3493#dl

AverTV volar gps 805
http://www.avermedia.com/RU/Upload/ProductImages/DS_A805_GPS_071205.pdf
Drivers for AverTV volar gps 805
http://www.avermedia.com/Support/Download.aspx?Type=Driver&id=422&tab=APDriver

Have you installed Net Framework 3.0 or above ?

Gloup_Gloup

Title: Re: Gigabyte U7300 and Windows XP SP3 problem
Post by: bajdec on November 29, 2011, 04:49:28 pm

I installed .Net Framework and doesn't help. I see this window:
(http://i44.tinypic.com/2qx5c1z.png)

Title: Re: Gigabyte U7300 and Windows XP SP3 problem
Post by: Dark Mantis on November 29, 2011, 05:32:56 pm

Hi

It will only work in Windows XP under service pack 2 or better. If you haven't installed that you will need to.

Sometimes it helps to install the software first and then the hardware or vice versa. These TV dongles are always a problem one way or another. Usually it is trying to get a decent signal.

Title: Re: Gigabyte U7300 and Windows XP SP3 problem
Post by: Gloup_Gloup on December 04, 2011, 02:09:05 am

Hi bajdec and Dark Mantis,

Maybe this infos, help you...

Ensure that the properties of each program file concerned (. Exe. Com) are betting, through the Compatibility tab (In the property file), mode Execute Programs as Administrator.

I am not sure, but why not...

Gloup_Gloup