Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: gc on December 27, 2011, 05:07:36 pm

Title: Marvell 91xx Config ATA Device GA-M68MT-S2 (rev 3.1)
Post by: gc on December 27, 2011, 05:07:36 pm

New build windows 7 64 bit. I have a yellow exclamation mark in device manager on Other Devices next to Marvell 91xx Config ATA Device. What is this? I am unable to find any drivers on the Gigabyte site to correct this. During bootup it shows a DVD attached to it.

Title: Re: Marvell 91xx Config ATA Device GA-M68MT-S2 (rev 3.1)
Post by: teknology9 on December 27, 2011, 05:09:04 pm

Hi gc and welcome to forum

Have you got the CD that came with your MB.....you might find it on there.


Teknology9

Title: Re: Marvell 91xx Config ATA Device GA-M68MT-S2 (rev 3.1)
Post by: gc on December 27, 2011, 06:25:44 pm

Yes I have the CD and have installed everything on the CD and it did not resolve the issue.

Title: Re: Marvell 91xx Config ATA Device GA-M68MT-S2 (rev 3.1)
Post by: gc on December 27, 2011, 06:58:17 pm

I found the proper drivers. They are at http://drivers.windows7download.com/win7-ecs-p55h-ak-v1-0-marvell-91xx-sata-6g-controller-driver-1-0-0-1039/download-ykhje.html (http://drivers.windows7download.com/win7-ecs-p55h-ak-v1-0-marvell-91xx-sata-6g-controller-driver-1-0-0-1039/download-ykhje.html). Turns out they are not for the Giagabyte MOBO but are for the Highpoint Rocket 620 SATA II Controller cards that I installed. The driver says it is for Intel but the set up file also includes AMD processors.
It fixed my problems and I can now see the drives attached to the Rocket 620 SATA II controllers during boot up. They had always shown up in file manager.

Title: Re: Marvell 91xx Config ATA Device GA-M68MT-S2 (rev 3.1)
Post by: teknology9 on December 27, 2011, 07:02:42 pm

Hi,

OK......that's good....problem solved.


Teknology9

Title: Re: Marvell 91xx Config ATA Device GA-M68MT-S2 (rev 3.1)
Post by: Dark Mantis on December 28, 2011, 09:30:59 am

They were showing that because the central processor of the card was a Marvell 9128 chip hence the Marvell 91xx prompt.  ;)

Title: Re: Marvell 91xx Config ATA Device GA-M68MT-S2 (rev 3.1)
Post by: teknology9 on December 28, 2011, 10:29:32 am

Listing full system spec would of helped. ;)