Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: john2in3 on February 16, 2012, 05:15:07 am
-
Hi, I have my drives configured as AHCI, no overclock, Win 7 pro already installed, boot drive is 300GB velociraptor, GA-Z68X-UD5-B3 Motherboard, and just got a Patriot Torqx 2 32 GB SSD, connected to MB and downloaded the latest smart response from Gigabyte (B11.0714.01). When I try to execute EZ Smart response I get the Error "Miss relation" on the ppch.dll (window name). It does not run.
Same error if SSD is connected to either the SATA III or SATA II motherboard connections.
What is the problem? Shouldn't this work?
-
Just use the Intel software instead, here's a guide on setting it up. I used google cache because they are doing site updates right now
http://webcache.googleusercontent.com/search?q=cache%3Ahttp%3A%2F%2Fwww.xtremesystems.org%2Fforums%2Fshowthread.php%3F274398-Step-by-step-guide-to-setting-up-SSD-caching-on-Z68&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a
Later when the site is back up and running here is the normal URL
http://www.xtremesystems.org/forums/showthread.php?274398-Step-by-step-guide-to-setting-up-SSD-caching-on-Z68
Or
http://24.120.60.166//forums/showthread.php?274398-Step-by-step-guide-to-setting-up-SSD-caching-on-Z68
As for the actual issue with the Gigabyte software, I'm not sure. Be sure you are using the latest BIOS, latest Intel INF drivers, and Latest Intel RST Drivers, that may help sort this out if you want to use it instead of the Intel based setup.
Also, be sure you have your SSD and HDD connected to the first two white Intel ports (SATA3_0 and SATA3_1)