Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: computer.al on February 17, 2012, 06:59:15 pm
-
Hello I am new to the forum. Have built machine which works ok but windows 7 home premium 64bit refuses to recognise my second hard drive and my second dvd. both my hard drives and both my dvds are sata. Bios version F11 is set ide have tried changing but machine refuses to boot into windows.
Can you help please?
Windows has sp1 installed
-
What all disks do you have, and what ports are the connected to (Please tell us color and #)
To change from IDE to AHCI or RAID after you've already installed windows you need to make the following changes
Enable switching between all IDE/AHCI/RAID modes by changing "Start" Values in these keys to 0 (Win 7 / Vista ONLY)
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pciide\Start
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorV\Start
-
:) Hi thanks foryour reply. It seems I have wasted your time. I removed all four devices and tried them in another machine the dvd is faulty (although it is brand new) the hard drive worked so I then changed the sata cable (also brand new) and everything is fine. Sorry again to have wasted your time.
-
Hi and welcome anyway.
Well at least you have found the problem and sorted it out. If only they were all so straightforward as this one. It just goes to show though that you shouldn't assume that something is working alright just because it is brand new.
-
Yes, great to hear you found the cause of the problem so quickly and easily!
Post back anytime if you need more help with anything!