Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Tehderek on March 11, 2012, 08:48:55 pm

Title: Z68-UD3H Boot Issue
Post by: Tehderek on March 11, 2012, 08:48:55 pm

installed a new mobo and am having an I just installed a new mobo and am having an issue booting. I installed a new i5 2500k and issue booting. I installed a new i5 2500k and 8gigs of Corsair too. I was originally getting 8gigs of Corsair too. I was originally getting beeping when I would turn on, but I beeping when I would turn on, but I disconnected the extra drives and now it just disconnected the extra drives and now it just turns on and doesn't beep. turns on and doesn't beep.

My extra hardware is a 700w gamexstream My extra hardware is a 700w gamexstream psu, dual GTX 460s and an OCZ SSD. psu, dual GTX 460s and an OCZ SSD.

Ask any and a questions. I may be overlooking Ask any and a questions. I may be overlooking an obvious issue. an obvious issue.

Could my board be bad? I assume if my new cpu and ram were bad I'd be getting beeping.

Any help is appreciated.

Title: Re: Z68-UD3H Boot Issue
Post by: Lsdmeasap on March 13, 2012, 07:21:57 am

Do you have the 24 pin and 8pin power cables connected to the board?   Have you tried clearing the CMOS for 3-5 minutes?