Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: dinosaur953 on April 13, 2012, 07:23:00 pm

Title: GA-8I945pm-rh motherboard
Post by: dinosaur953 on April 13, 2012, 07:23:00 pm

I have been searching for the correct drivers for the GA-8I945PM-RH motherboard for over a week.  I contacted Gigabyte to see if they had any suggestions.  They said try the 8I945P drivers but they didnt work either.  I would really like to get this board up and running so if there are any suggestions as to what to do next, they would be highly appreciated.

Title: Re: GA-8I945pm-rh motherboard
Post by: Gloup_Gloup on April 13, 2012, 10:18:18 pm

Hi and Welcome,

Use this link..

http://www.touslesdrivers.com/index.php?v_page=29

Same answer here :
http://forum.giga-byte.co.uk/index.php?topic=2883.0

Gloup_Gloup

Title: Re: GA-8I945pm-rh motherboard
Post by: clode8t on May 08, 2012, 11:17:37 am

Hello,

An other question about GA-8I945PM-RH . . . I have 2 memory 512Mb in slots 1 and 3 . . . what's possibility about growing the memory on my card ? is it possible to have 2 Go (so buying 2 DDR2 of 512Mb ? or one of 1Go) .... what's about product clip memory ???

thank's

Title: Re: GA-8I945pm-rh motherboard
Post by: Dark Mantis on May 08, 2012, 01:35:05 pm

Hi

Each slot will take a maximum module of 1GB giving a total of 4GB on the motherboard. Make sure that you purchase memory that is compatible and to be safe all the same.

Title: Re: GA-8I945pm-rh motherboard
Post by: ady88s on October 22, 2012, 01:27:36 pm

Hi All,

I'm new to changing hardware and am thinking about upgrading the hard drive on a PC.

The motherboard is a GA-8I945pm-rh, but I'm not sure what hard drive I can get. Will any sata drive do?

Can anyone suggest a model that would work in terms of sizes and which is least hassle as I am not very techie!

My current hard drive is a Barracuda 7200.7 / Seagate / 160GB.

I'd like to get something at least 500GB, but not necessarily any larger than this.

Thanks in advance