Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: donetello on May 08, 2012, 08:36:06 am

Title: Gigabyte X58 UDR3 Rev 1.6 CPU fan speed ?
Post by: donetello on May 08, 2012, 08:36:06 am

Running an I7 920 D0 on the above board with a prolimatech Megahelems cooler twin Silent Eagle fans in push pull config.The fans are now constantly noisy and bios shows they are running at 1896  RPM and don't drop below this at all,Its not overclocked at the moment,PSU is a corsair HX 850.Board fault perhaps ?.If someone could check thier CPU fan speed on this board that would be great thanks

Title: Re: Gigabyte X58 UDR3 Rev 1.6 CPU fan speed ?
Post by: Fatman on May 09, 2012, 12:24:49 am

This maybe a stupid question but, have you clean out all those wascally dust bunnies??

Title: Re: Gigabyte X58 UDR3 Rev 1.6 CPU fan speed ?
Post by: donetello on May 10, 2012, 04:13:04 pm

Yes it's always clean,the only time it runs normally is when the bios smart fan setting is on voltage,it then runs around 1050 rpm set in Auto or pwm it goes beserk and runs flat out around 1900 rpm.