Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: spluff on May 24, 2012, 09:57:11 am

Title: Z77X-UD3H Marvell Problem
Post by: spluff on May 24, 2012, 09:57:11 am

Hi all,
 
I have just build a new system with a Z77x-UD3H motherboard and have a quick question:-
 
The marvell rear esata ports do not seem to work - I have installed Marvell eSATA Controller Driver (1.2.0.1010), enabled as AHCI mode - there is no device in device manager for this and my external icybox 1tb hd doesnt get detected (works via usb)

1. Should there be a marvell device in system properties?
 
2. What can I do to fix this problem?
 
Many thanks

Title: Re: Z77X-UD3H Marvell Problem
Post by: spluff on May 25, 2012, 12:34:02 pm

Please reply - I need to know if my board is ok or I have to send it back within 7 days

Title: Re: Z77X-UD3H Marvell Problem
Post by: ex58 on May 25, 2012, 12:48:13 pm

Which BIOS you have installed?

Title: Re: Z77X-UD3H Marvell Problem
Post by: spluff on May 25, 2012, 04:48:07 pm

its the original bios which came with the motherboard.....

I tried upgrading to the latest on the gigabyte webside F9 and now when I try and install windows again the usb devices dont work (kb and mouse) but they work if i boot into windows....

Help me

Title: Re: Z77X-UD3H Marvell Problem
Post by: ex58 on May 25, 2012, 06:40:52 pm

http://forum.giga-byte.co.uk/index.php/topic,9078.0.html

Title: Re: Z77X-UD3H Marvell Problem
Post by: Dark Mantis on May 28, 2012, 12:12:08 pm

If you still have problems please post a list of your main hardware as that will help us get an idea of your system.