Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: pbd2 on June 27, 2012, 12:08:47 pm

Title: GA-Z68X-UD7-B3 upgrade to F10 without Sandybridge CPU
Post by: pbd2 on June 27, 2012, 12:08:47 pm

Hello all
I am selling my GA-Z68X-UD7-B3 on ebay because I got the Sniper :) , its currently on F8 bios. I can see that the F10 bios supports the Ivy Bridge CPUS.
The question is do you need a Sandbybridge CPU to make it boot? I dont have really have one available Can I at least boot my board on F8 with an Ivybridge cpu and flash the bios to F10?
I hope the question marks sense.

Title: Re: GA-Z68X-UD7-B3 upgrade to F10 without Sandybridge CPU
Post by: Dark Mantis on June 27, 2012, 08:47:55 pm

Hi

I am afraid that your question isn't as clear as it could be. Which motherboard do you want to run the SandyBridge CPU with ? You talk about the GA-Z68X-UD7-B3 but then go on to make it sound like it is the Sniper that you want the information on. If so which Sniper do you have ?

Perhaps you could rephrase your question.

Title: Re: GA-Z68X-UD7-B3 upgrade to F10 without Sandybridge CPU
Post by: Hesoer on June 30, 2012, 07:28:43 pm

Well is the motherboard compitable with intel i7 3820? because my GA-x79-ud3 is not , it is not configured with bios f8 and i do not know how to update the bios without an other processor, It doesnt even boot up.

Title: Re: GA-Z68X-UD7-B3 upgrade to F10 without Sandybridge CPU
Post by: Dark Mantis on July 01, 2012, 09:25:20 am

Hi

It is not a case of the motherboard being incompatible but just that the BIOS needs updating first. For this you will require a CPU that is supported by the existing BIOS. If you look at this link it will show you exactly which BIOS version is needed for a certain processor and this (GA-Z68X-UD7-B3 ) motherboard.

http://uk.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=3847