Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: tudstudent on August 09, 2012, 05:50:12 am

Title: Gigabyte GA-Z68X-UD7-B3 -> Reboot problems
Post by: tudstudent on August 09, 2012, 05:50:12 am

Hi,

I have a problem with my board:

When I am rebooting the board sometimes goes into error. This means black screen and error beeb codes:
___ _ _ (1 long 2 short)

According the manual this is or mainboard or graphics card.
I have tested my proc with Prime95 for a night, no problems.
Testen my mem with memtest, no problems
Tested my HD with badblocks, no problems.

So I am wondering if this is a known problem, or if this is a bug?

This happens before OS is loaded (also with standard bios settings and optimized and manual)

• Corsair F60 - 60GB - SataII - Firmware 2.4
• Gigabyte GA-Z68X-UD7-B3 - Firmware F10
• Intel 3770k
• Noctua D14 PWM
• Corsair HX850W
• ASUS ENGT240 GDDR3
• Opensuse 12.1 - 64 bit

Title: Re: Gigabyte GA-Z68X-UD7-B3 -> Reboot problems
Post by: Snakeyes on August 09, 2012, 08:00:53 pm

Have you tried the new beta 11a bios. Since bios 10 was the first for Ivy Bridge, the new beta might have some improvements. I have the same motherboard, but with the Sandy Bridge processors. Best of luck

Title: Re: Gigabyte GA-Z68X-UD7-B3 -> Reboot problems
Post by: tudstudent on August 09, 2012, 08:46:58 pm

Bad thing is, that I could not find any changelog.