Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: winter2012 on August 20, 2012, 01:45:10 am

Title: ACP\INT33A0 hardware
Post by: winter2012 on August 20, 2012, 01:45:10 am

Hi, just a little thing that I found during update BIOS firmware to version U1H.
Motherboard:  Gigabyte GA-Z68X-UD3H-B3-rev1.3 

If you check "Enable" for the Intel Smart Connection Technology in the BIOS, you will find under Control Panel \ Device Manager an Unknown port with hardware ID: ACP\INT33A0.  It is actually the port for Intel Smart Connection Technology.  To update driver, you need to go to Intel.com website and find driver for it.  For me, it is a file: ISCT_3.0_Win7_PV.zip.  After download, un-zip the file and run installation for it.  It should fix the problem.   ;)   

Title: Re: ACP\INT33A0 hardware
Post by: Dark Mantis on August 20, 2012, 04:30:13 pm

Hi and thanks for the heads up on this little bit of info. I expect there will be others scratching their heads about it.

Title: Re: ACP\INT33A0 hardware
Post by: skuffle on September 17, 2012, 01:02:45 pm

You're not wrong, I was struggling to find the source of this strange device too! To help others find this post via Google, another way of formatting the device ID would be ACPI\VEN_INT&DEV_33A0

The download link on the Intel website is here:

http://www.intel.com/p/en_US/support/highlights/sftwr-prod/smrt_cnct

I actually saw this on an Asrock motherboard, so it is not specific to Gigabyte motherboards. Thanks for taking the time to post the information :)

Title: Re: ACP\INT33A0 hardware
Post by: Smitch79 on December 13, 2012, 06:47:44 pm

Indeed, I can confirm this works on Dell Latitude systems as well.