Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: ASH on August 23, 2012, 12:46:44 pm

Title: GA-Z77-D3H differences between v1.0 and 1.1
Post by: ASH on August 23, 2012, 12:46:44 pm
What are they ?
Title: Re: GA-Z77-D3H differences between v1.0 and 1.1
Post by: Dark Mantis on August 23, 2012, 08:48:21 pm
Hi

Quite often there are few if any noticable differences between revisions. It maybe something as small as the make of a particular chip has changed.
Title: Re: GA-Z77-D3H differences between v1.0 and 1.1
Post by: Del on August 24, 2012, 10:01:22 am
It would seem that all Z77 have a new 1.1 revision , mabie this is the fix for the faulty boards they have been selling.

I have an unusable GA-Z77-DH3 rev 1.0 as do many others , will we be able to RMA and get the fixed boards I wonder, :-\
Title: Re: GA-Z77-D3H differences between v1.0 and 1.1
Post by: Dark Mantis on August 24, 2012, 10:09:06 am
If you have a specific problem then members of the forum will help you to find a cure for it if possible. If not then you can arrange an RMA to have the board repaired/replaced.

You can contact GGTS for help too here :

Just enter your email address and click on the language of choice. For the UK:


GGTS   http://ggts.gigabyte.com/

http://uk.gigabyte.com/support-downloads/support-downloads.aspx

Title: Re: GA-Z77-D3H differences between v1.0 and 1.1
Post by: Del on August 24, 2012, 10:21:21 am
Thank you Dark Mantis.
I have already been in contact with GGTS and all they can say is take it up with the vendor I purchased the board from, they will replace with same rev 1.0.

The board works fine with F10 BIOS it was shipped with , but Ivy bridge functions do not work with F10.

When I updated the BIOS to F14 it killed my RAM (Auto settings default values loaded) so don't want to test it again as its costing me ££ now.

looks like I'm going to lose out here. :((

Edit: BIOS version.



Title: Re: GA-Z77-D3H differences between v1.0 and 1.1
Post by: xxvaderxx on November 16, 2012, 08:35:38 pm
Yes, i have the same problem with an ivy bridge, with the amount of issues Gigabyte seems to be having with this models, they should make public what changed with the revision.