Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Hawk99 on September 11, 2012, 12:42:38 pm

Title: Fans stopping and starting when all four memory slots are filled
Post by: Hawk99 on September 11, 2012, 12:42:38 pm

I am in the process of a new build using a New Gigabyte GA-Z77X-D3H and ICORE 5 CPU.
 
The problem is when I put the memory 4x 8GB in all four slots, the fans cut out and restart.
 
If I use slots 1 and 3 I can get a partial installation and the fans stay on, then get the BSOD! 
 
Any help would be appreciated as I am running out of ideas.
 
Thank you
 

Title: Re: Fans stopping and starting when all four memory slots are filled
Post by: Hawk99 on September 11, 2012, 12:50:47 pm

I forgot to mention that the bios version is F6 and the graphics card is also a Gigabyte and will not install either. :-\

Title: Re: Fans stopping and starting when all four memory slots are filled
Post by: Dark Mantis on September 11, 2012, 08:19:18 pm

Hi and welcome.

It could be that you have one of several problems and without a bit more to go on it is hard to say. Please post a list of your hardware especially the PSU.

Are your memory modules compatible with your motherboard ? If so where did you check them ?

Title: Re: Fans stopping and starting when all four memory slots are filled
Post by: Hawk99 on September 13, 2012, 01:22:04 pm

MOBO - Gigabyte GA-Z77X-D3H

Video - Gigabyte GTX 550TI

PSU - Antec  - 620w NEOECO MODULAR PS

Intel core i5 Ivybridge 3570K s1155

Memory - 16gb (4x8gb) Corsair Vengeance DDR3 (only one working)

LG Multi blu Ray RW RE-WR

Coolermaster Hyper 612S (not in use due to weight)

Memory tested one at a time in the only working slot. Have tried every configuration!
It started off as a complete system from Scan, and added to from other sources.
Have now managed to get the video card working, and installed windows. All ok but will not use the spare 3 memory slots

Thanks for help, driving me nuts!