Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: APV on September 23, 2012, 02:41:38 am

Title: Brand new build z77x-ud5h and windows wont load.
Post by: APV on September 23, 2012, 02:41:38 am
z77x-ud5h
I5 3.4 unlocked
ssd 120 ocz
1 tb seagate.
2 x 4 ddr3 1600 kingston
Liteon  dvd  ihas424

up date bios to #14

Ok brand new build  Installed all the hardware  boots up and you start to loads drivers get to first windows 7 screen ask for dvd drives disk.. but it wont read the disk and wont go any farther. not sure whats wrong maybe board but not getting any errors
     Tried a different dvd player and each h/d seperately. still same problem.
     also tried to install window xp just to see what happen and load drivers and blue screen

                not sure what to do next..

     
Title: Re: Brand new build z77x-ud5h and windows wont load.
Post by: Zardoc on September 24, 2012, 10:36:59 pm
Did you try to reset CMOS to default settings?

Is your Win 7 dvd MS or burned?
Title: Re: Brand new build z77x-ud5h and windows wont load.
Post by: APV on September 25, 2012, 05:24:20 am
Quote from: Zardoc on September 24, 2012, 10:36:59 pm
Did you try to reset CMOS to default settings?

Is your Win 7 dvd MS or burned?

Tried both have a new copy and an friends burned, and reset cmos and bios. :(
Title: Re: Brand new build z77x-ud5h and windows wont load.
Post by: Dark Mantis on September 25, 2012, 02:20:33 pm
Hi

Is the Windows disk a genuine version or copied ?

Have you made sure that all the power cables are connected, that is the 24 pin and the 8 pin ?

What power supply have you got driving it and how old is it ?

Are the memory modules in the right slots ? Try using just one stick in the first slot and if that doesn't help swap it with another one.

Make sure that you have Optimised BIOS Defaults loaded ion the BIOS.
Title: Re: Brand new build z77x-ud5h and windows wont load.
Post by: Zardoc on October 17, 2012, 01:22:35 pm
Quote from: APV on September 25, 2012, 05:24:20 am
Quote from: Zardoc on September 24, 2012, 10:36:59 pm
Did you try to reset CMOS to default settings?

Is your Win 7 dvd MS or burned?

Tried both have a new copy and an friends burned, and reset cmos and bios. :(


Bumer RMA.  :'(