Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: passnthru2 on October 07, 2012, 05:16:12 am
-
i have 3 200mm LED fans with black long narrow 2 hole plugs like F-Panel plugs that say 'LED pwr +-'. i cant find any info in the handbook that says where to plug them in.
i have a Gigabyte GA-Z77X-UD5H - LGA1155 Intel Z77 Chipset ATX Motherboard DDR3
and
a Rosewill THOR V2-W Gaming ATX Full Tower Computer Casswappedwaped the 3 Rosewill 200mm case fans with some Bitfenix Spectre Pro's, 156cfm 25dB 200mm fans with blue LEDs
a Rosewill THOR V2-W Gaming ATX Full Tower Computer case, i swapped the 3 Rosewill 200mm case fans with some Bitfenix Spectre Pro's, 156cfm 25dB 200mm fans with blue LEDs
case fans have small black LED power plugs on ling wires like F-Panel plugs where do i plug them in ?? would that be a MOLEX plug item with adapters for the sockets.?? the box says starting voltage is 5volts operating is 12volts
i don't know anything about this stuff, i need to learn it tho
-
Yes use the molex adapters and plug them in!
-
If you look on your motherboard or in the manual you will find that there are connectors placed arouind the motherboard with labels like PWR_FAN and CPU_FAN and SYS_FAN1/2/3 etc any of these will accept the connectors for case fans or as Fatman said use a molex adapter for power from the PSU directly.
I would note however that SYS_FAN2 only works at half power.