Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: beeaton on January 30, 2010, 04:02:52 pm

Title: GA-MA785GM-US2H - RAID drives not visible in Windows 7
Post by: beeaton on January 30, 2010, 04:02:52 pm
I have a Seagate 160 GB IDE hard drive in which I Windows 7 installed and the system boots up fine.  I also have 2 SATA Seagate 1.5TB drives that I have setup with RAID 1 using the onboard raid controller.  While in the BIOS, I see the RAID drives as one of the bootable drives (SCSI-0 RAID Ary 1), so it seems the raid drives are functioning properly.  Also, in the BIOS, I have the OnChip SATA Type = RAID and OnChip SATA Port 4/5 Type = As SATA Type

The problem that I am having is that when Windows boots up, the RAID drives do not show up.

Did I miss a step when I was installing Windows?

I would like to keep Windows on separate drive and use the RAID drives as my data store.

Any help would be greatly appreciated.