Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: ricco59163 on January 23, 2014, 06:50:35 am
-
My problem is the following
When I put my GTX770 bios on a F12W up a Bios F12y the "Legacy Only" does not work, it does not detect my graphics card
With Bios F12L there is no problem, the pc running smoothly.
I want to access the bios f12y for my G.Skill 2400 Mhz work properly.
When I put a 4300 series AMD, there s any problem detection "Legacy Only"
I'm using Win7 64bit, I did not need UEFI
-
The problem is that when you set the bios to legacy that card will not boot. That card is a UEFI card and that is why you need it set to UEFI.
If you want to run the 4300 series card you should have it set to legacy. All GTX-700 series are UEFI.
-
with Bios F12y
1 I used the card for 4300 series access bios
2 Then I put in Legacy Mode
3 I backup the BIOS
3 I put my GTX770
4 I boot
5 but it does not work, windows 7 64 bit does not work.
will it be possible to have a F12Y Bios Legacy default mode?
-
With Bios F12L
I note with the same manipulation I get to run my GTX770 card under Win 7 64 Bit in Legacy mode
-
http://www.tomshardware.co.uk/answers/id-1728575/victim-gtx-770-booting-windows.html#. ( same probleme of me )
-
When you setup the bios do you have it set to EFI or Legacy. Plus have you tried it both ways too.
-
I have set Legacy , but when I put GTX , the set up switch to UEFI ???
-
can you give me a bios modded with juste Legacy mode ?
-
this morning , with bios F12y ...
I have put
in pci-e1 the amd series 4300
in pci-e2 the GTX770
I have set priority Pci-e2 in bios in legacy mode
the Motherbord boot to the first Pcie ???
witch difference betwin the F12l and the F12y ???
-
If you getting the Bios from Tweaktown ask them. Plus if the 770 card runs on F12y in the EFI mode why do you want it to run Legacy?
I don't understand what you are trying to do. If you trying to use one of these cards for Nvidia PhysX Memory than you have the cards backwards.
http://www.youtube.com/watch?v=cbww3dhzK0M
-
I have a G.skill 2400Mhz , only F12y can run correctly my DDR3.
My config :
http://valid.canardpc.com/q10q3y (http://valid.canardpc.com/q10q3y)
I have Try F12y with AMD series 4300 and the XMP run correctly at 2400mhz
-
nothing ?
-
G1 assassin 2 bios F12s the best bios for this MotherBoard ;) , I have test all beta bios !