Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: zaid1983 on June 08, 2014, 05:49:02 pm
-
Hi everybody,
Before several days I install new motherboard gigabyte g41 combo ,it working fine
But suddenly it stop working , only black screen & cpu fan on ,I disconnect the Ram
Modules and the display adapter , still the same issue , also disconnect the HDD &
DVD drive and make clear to the CMOS but no luck , I noticed a high temperature on
The chipset when I touch the heat dink I feel unusual heat and the issue the same
Can any one advice please , is this high temp may mean physical damage waiting
For your reply , thank you in advanced.
-
Some chipsets have high temps it isn't unusual. 50c is the normal high and the normal low is about 28 to 32c. Do you have a speaker hooked to it and if so what is the beep count?
-
Hi,
Yes I connet a speaker with it but no sound from the buzzer at all
Just black screen and the fan of CPU spin.
Thank you.
-
One thing to look at is the caps on the board to make sure one didn't start leaking.
-
Also look for a bent pin on cpu socket. Or when you boot check keyboard lights and mouse to make sure they are lite up.
-
Hi guys,
I bought this motherboard before a week before it get this issue it is new
The capacitors were fine no damage with them , the light of the mouse working properly but the keyboard light stays on power only not the three
Lights blinking as computer boots.
Thank you.