Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: k3lt on July 22, 2015, 04:12:32 pm

Title: How to properly set BIOS for clean Windows 10 UEFI install? [GA-B85M-D3H]
Post by: k3lt on July 22, 2015, 04:12:32 pm

I'm about to install Windows 10 x64 in UEFI mode for the first time..
How to properly configure following BIOS settings: "OS Type / Windows 8 Features" , "Secure Boot" "CSM Support" and "Storage Boot Option Control".

My motherboard is GA-B85M-D3H (BIOS F14) , system will be installed on SSD and the rest will reside on hdd.
Could anyone help, dont want to screw anything since i will be using UEFI installation for the first time..

Title: Re: How to properly set BIOS for clean Windows 10 UEFI install? [GA-B85M-D3H]
Post by: dmdilks on July 23, 2015, 02:58:21 am

Just go in and tell it to boot from the UEFI DVD.

Plus make sure you have the SSD sata Intel controller set AHCI.

The CSM supports is set enabled by default.

I myself would not run secure boot. But if you Microsoft looking over shoulder that is up to you.

You can just set it to windows 8 too.