Official GIGABYTE Forum

At The Very Beginning => Technology & Products => Topic started by: runn3R on April 13, 2010, 02:07:46 pm

Title: Re: Charge iPad and iPad 2 using GIGABYTE motherboards
Post by: runn3R on April 13, 2010, 02:07:46 pm
GIGABYTE is first with Motherboard iPad recharging capability.
There are over 40 GIGABYTE motherboard models supply sufficient power to charge an iPad while it is being used.
It due to 3x USB Power Boost (http://www.giga-byte.co.uk/microsite/102/data/mb-usb3.htm#power3x) function on all USB ports for the most power hungry USB devices like for instance iPad.

http://www.youtube.com/v/IeenF46xzwo

More info:
http://forum.giga-byte.co.uk/index.php/topic,1808.msg8145.html#msg8145
Title: Re: Charge iPad using GIGABYTE motherboards
Post by: Yaroslav on August 02, 2010, 11:23:05 am
Hi everyone!

I'm very interested in charging capabilities of my mobo GA-H57M-USB (rev 1.0) for devices other than Apple iPhone iPad or iPod.
According to manual and information on official website, it has "3x USB Power Boost" function and support of "On/Off Charge" utility, but has no quick charge ports with white and red colored USB pin headers.

But I had never seen any information on the website or the internet about support of any other kind of phones, multimedia players, PDAs... (even enthusiasts experiments).
There is some proprietaty Apple function or protocol to communicate power requirements for their devices?
As far as I know USB standard has realisation of this power negotiation capabilities and device can tell how many mA current it requires.
In Windows environment (device manager) it shows maximum of 500mA for any my device. Is that limitation of Windows OS or this is only nominal value and real current can exceed this if mobo support "3x USB Power" or "On/Off Charge"?

So the main question - is charging boost possible for non Apple devices (particularly on my mobo)?
If not, has GIGABYTE any plans to add whis support later?
Title: Re: Charge iPad using GIGABYTE motherboards
Post by: Dark Mantis on August 02, 2010, 11:29:43 am
I am not sure but logic dictates that any device that can be linked to a USB port and with a maximum current requirement within those parameters should be able to be charged via said port.
Title: Re: Charge iPad using GIGABYTE motherboards
Post by: Yaroslav on August 02, 2010, 11:55:51 am
Thank you for reply!

I've already started experiments with testing charging time for my devices compared to stanalone charger and other PC USB ports.
Interestingly, is there some software other than device manager to control or monitor USB power consumption, at least that shows current requests?
Using multimeter and cracking cables is too much for my little curiosity  :)
Title: Re: Charge iPad using GIGABYTE motherboards
Post by: Dark Mantis on August 02, 2010, 12:04:59 pm
I wouldn't be surprised but I can't think of any to recommmend right now. Maybe someone else will see the thread and jump in with an answer.
Title: Re: Charge iPad using GIGABYTE motherboards
Post by: paulthomas on September 02, 2010, 01:40:21 pm
I think apple ipad is best for use everywhere, because i use  my apple i pad in every work and i found there its best performance and i m totally satisfy with apple products.
please inform me if you found any disturbance with apple ipad.

Thanks,
Paul
Title: Re: Charge iPad using GIGABYTE motherboards
Post by: Dark Mantis on September 03, 2010, 09:00:14 pm
Apple fanboy ::)
Title: Re: Charge iPad and iPad 2 using GIGABYTE motherboards
Post by: runn3R on April 13, 2011, 12:21:35 pm
If you’re considering buying an iPad 2 and were wondering if your GIGABYTE motherboard would be able to quick charge it, On/Off Charge still works as well as with the original iPad.

Please check for more details at our blog (http://gigabytedaily.blogspot.com/2011/04/gigabyte-onoff-charge-quick-charges.html).
Title: Re: Charge iPad using GIGABYTE motherboards
Post by: Walthour on May 11, 2011, 07:37:58 am
Thank you for reply!

I've already started experiments ipad case with testing charging time for my devices compared to stanalone charger and other PC USB ports.
Interestingly, is there some software ipad 2 case leather other than device manager to control or monitor USB power consumption, at least that shows current requests?
Using multimeter and cracking cables is ipad 2 cases too much for my little curiosity  :)

I am not sure but logic dictates that any device that can be linked to a USB port and with a maximum current requirement within those parameters should be able to be charged via said port.