Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: ogladiatore on March 18, 2017, 08:07:55 pm
-
hi,
I have windows 7 64bit and I have changed the registry entry to enable the ahci mode without causing the crash after activating via bios AHCI mode.
But by the bios I can not find this option?
Use the P55A-UD3 board
Thanks in advance
-
See page 24-25 of your manual. Ensure the drive is connected to the primary SATA controller SATA2_0~5
Now see page 51. This is where you set the operate mode for the controller, native SATA vs. RAID, IDE & Legacy mode. Keep in mind that SATA on this chipset is emulated.
Would suggest you install the latest IRST driver since the Intel Matrix Storage Manager driver was for XP.