Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: SLK on March 21, 2017, 01:08:57 pm
-
New motherboard GA-B250M-D3H (tested 2 new motherboards) resets bios settings to default when turning on after unpluging psu for a long time.
One mobo has F1 ver. of bios, second F4 - no difference.
It doesn't reset when psu is not unplugged after turning off computer.
Battery checked, different settings of bios checked. No change. Windows' stability is ok.
Please help, I don't know what to do.
RAM: Corsair DDR4, 8GB, 2400MHz
CPU: Pentium G4560
-
The only thing that keeps the cmos saved is the battery. If the you are losing the settings then it is the battery or bad connection with the battery. Or a bad connection from the battery to the bios chips. I would email or call support.
-
You are right.
If power is back, WOL light is blinking, but it was disabled earlier in bios. It means the bios was reset before turning on motherboard.