Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: ranger1 on May 09, 2010, 06:26:33 am
-
Hi looking for clarification on the new beta bios f3f. After installing my new x6 1090t into my rig I noticed that the default vid was 1.475. This should be 1.35.
I am running the Beta Bios for this chip and so think its a BIOS problems but cant be sure. I have OC'ed the new 1090t to 20 multi@4.0 mhz. runs like a dream but the following tools display the following VID's
BIOS lowered from 1.474 norla to 1.425
AOD = 1.475
CPUz = 1.425
everest = 1.17 - 1.42
CPUID = fluctuates between 1.18 and 1.42
The other problem I have is that VID fluctuates up and down. I have deactivated everything in the BIOS, boost, CNQ, C state u name it but the VID still fluctuates up and down.
yes I know its beta but come on I have this new chip and its not upto scratch due to bios issues. IS IT BIOS?
-
Id say it was the bios is almost the same problem im having with the ga890fx-ud5. With cpuid i read 3200 speed with aod and in bios says 3500. My voltage says 1.4750. Cant turn off the C1 support even set to disabled it still goes to 800.