Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: JManFirstClass on August 22, 2017, 10:51:16 pm

Title: Updated my GA-Z77P-D3 mobo and now is boot/loop.
Post by: JManFirstClass on August 22, 2017, 10:51:16 pm

I got a GA-Z77P-D3 and I updated it and now is in Boot/loop and won't go to recovery. It just keeps turning on and shutting down. Please help, I tried to clear the CMOS and it still doing the same thing.

Title: Re: Updated my GA-Z77P-D3 mobo and now is boot/loop.
Post by: shadowsports on August 23, 2017, 03:20:26 pm

The z77's are particularly ornery when it comes to BIOS recovery.  Hav't looked at your board yet, but here are some questions/suggestions.

-You've tried unsuccessfully to force boot from the back up BIOS?
-Try CLR_CMOS - Disconnect power from board, but leave BATT installed then short jumper
-Does your board have a flash back button the rear panel?
-Remove all but one stick of RAM
-Try boot and hold ALT, then try rapidly tapping F10

This is tough to recover from on this chipset.  Let us know your results/answers.