Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: mark007 on May 20, 2010, 08:03:35 am
-
Hey everyone, I am really stuck. I have a m55sli-s4 motherboard, and I decided to run sli with 2 inno3d gts 250 video cards. Both cards are recognized under system management, and I have installed the latest nvidia drivers for them in windows 7. Everytime i run them in sli mode, I get a really funny colored screen, and basically its useless. I have tried 3 power supplies, tested the cards individually in another system, the only thing I haven't done is upgrade the bios.
Any ideas, could it be the sli bridge??? any advice would be great.
Cheers.
P.S. Has anyone got a Amd Phenom *4 9550 or higher running on these boards???
-
I had the same problem. I would get a locked screen with blocky colors and black background. Mine was because of overclocking or the driver. I reinstalled the drivers and bumped the clocks down a bit haven't had the issue since.
My specs: GA-M57SLI-S4 Rev 2.0
Athlon X2 6000+
4GB DDR800
2 MSI GTS 250's SLI OC'ed to 740/2250 Driver 197.45
Corsair TX-750w PSU
-
Tried reinstalling drivers, upgrading bios no luck. If I don't run the machine with any over clocking, it will run - but seriously in that state the machine is so slow it isn't even worth using.