Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: simmyjiff on July 10, 2021, 08:23:47 am

Title: X470 Aorus Ultra-No beeps after PSU upgrade
Post by: simmyjiff on July 10, 2021, 08:23:47 am

HI all, Just upgrade my PSU to a EVGA Bronze 600 form a 500.
Whilst the PC boots up OK it seems to fun OK, everything works, but somehow differently? There are no beeps, the shutdown is different, the Aorus emblem on the mobo used to flash. I doesn't seem right, but as I say it all works?
Thanks
Jim

Title: Re: X470 Aorus Ultra-No beeps after PSU upgrade
Post by: shadowsports on July 11, 2021, 12:11:09 pm

Greetings,
Changing the PSU shouldn't change this behavior.

Review your BIOS settings. 
Check under BIOS > Full Screen Logo and also the Fast Boot Option.

FSL is enabled by default, Fast Boot / Ultra Fast Boot is not and frankly there is no need for it. 

Only other possible scenario might be if using onboard graphics in conjunction with the onboard HDMI port, but this too is unlikely. 

These are the only things I can think of that might effect Aorus logo display or beep during POST.