Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Arnak on September 23, 2021, 09:54:06 pm

Title: Saving Bios Settings
Post by: Arnak on September 23, 2021, 09:54:06 pm

Hi,

Just a quick question, is it possible to save the bios settings on a Z490-Plus Gaming motherboard, please?

I cannot see a way to do that in the manual.

If so how do I do that?

Thanks,

Martin

Title: Re: Saving Bios Settings
Post by: dmdilks on September 24, 2021, 02:50:17 am

It is on page 24 "Chapter 2 BIOS Setup" once you are in the Bios <F8> Access the Q-Flash utility. In there it should give the option to backup your bios.

Or if you just want to save the bios setup you can save it to a profile and then save that to a flash drive.

Page 42: 

Save Profiles
This function allows you to save the current BIOS settings to a profile. You can create up to 8 profiles and save as Setup Profile 1~ Setup Profile 8. Press <Enter> to complete. Or you can select Select File in HDD/FDD/USB to save the profile to your storage device.
 
Load Profiles:
If your system becomes unstable and you have loaded the BIOS default settings, you can use this function to load the BIOS settings from a profile created before, without the hassles of re-configuring the BIOS settings. First select the profile you wish to load and then press <Enter> to complete. You can select Select File in HDD/FDD/USB to input the profile previously created from your storage device or load the profile automatically created by the BIOS, such as reverting the BIOS settings to the last settings that worked properly (last known good record).