Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: chookey on March 28, 2008, 05:20:25 pm
-
Built this pc around the above motherboard and a core2 duo 8200. Added a gigabyte radeon HD 3870 and 4gb of OCZ ddr2 ram.
Got nothing but constant crashing until I changed the ram timing and voltage in the bios. Pc seems to be running fine now.
I looked in the easytune program that was supplied and set the fan speed to the recommended setting of 100% at 60 degrees. I then set the audio alerts and it keeps alerting me to danger.
It seems to be a temperature problem. I have an arctic cooler for the cpu, 2 x 92mm fans and an 80mm installed at the moment. Obviously there is also a fan on the graphics card.
Any ideas please?
Regards....Chookey
-
HI
please ckeck what kind of alerts you have enabled. As from the screenshot you provided i can see there are 2 alerts : for CPU FAN speed too low (around 1900 RPM) and System FAN speed is 0 (probably you have not connected anything to SYS FAN connector.