Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: edat362008 on June 21, 2011, 05:33:24 am

Title: GA-MA770T-UD3P and SLI
Post by: edat362008 on June 21, 2011, 05:33:24 am

I need some input as I am having trouble finding the answer to my question. My MOBO is the GA-MA770T-UD3P rev 1.1 F11C bios ver, AMD Phenom II X4 965. Running Win7 64 , 4gb ram with a 700w psu and currently a Zotac 9800gt 1gb gpu. I'm wanting to put in a second gpu via SLI and I'm unable to find out if my MOBO is capable running SLI. Thank you for any help.
 

Title: Re: GA-MA770T-UD3P and SLI
Post by: Aussie Allan on June 21, 2011, 07:50:49 am

 With only one blue PCI-E slot.... you may have issues trying to force two cards in the one slot......what times is it ?....time for another MoBo!

 Aussie Allan

Title: Re: GA-MA770T-UD3P and SLI
Post by: absic on June 21, 2011, 08:40:22 am

Hi there,

As Allan has stated with your current motherboard the answer is no.
If you really want to run an SLI set-up on an AMD system (what's wrong with crossfire?) Then you will have a few problems ahead unless you invest in one of the new 9 series motherboards that have SLI support. On other AMD motherboards (series 7 & 8) SLI is not officially supported although it is possible to get it to work with a bit of perseverance and a lot of tweaking of drivers etc.

Title: Re: GA-MA770T-UD3P and SLI
Post by: edat362008 on June 24, 2011, 05:23:26 am

I'm a tard fellas and apologize for this question. 1 slot, 2 cards is not going to work very well at all. I however decided and went with an EVGA GTX 550 Ti to replace the 9800 GT I had. Thanks for the feed back anyway guys despite my question.   :P

Title: Re: GA-MA770T-UD3P and SLI
Post by: Aussie Allan on June 24, 2011, 07:11:13 am

 Edatxxxxx

  Your welcome any time.......I'm sure you will enjoy the 550 immensely....... and no!.....no matter how obscure you think the question............sometimes It's the only way forward


  Aussie Allan