Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: Steve66a on October 17, 2011, 03:41:00 pm
-
Will there be a bios update for new AM3+ boards, 880gma-usb3, that support FX CPUs any time soon?
-
Hi
I would think that it is highly likely but the best thing would be to ask GGTS as they have access to far more information the we do.
Just enter your email address and click on the language of choice.
GGTS http://ggts.gigabyte.com/
Please expect several days for a reply.
-
Hi there,
A similar question was raised a couple of days ago on another socket AM3+ motherboard and I was informed by Gigabyte that although the website(s) have not yet been updated they do indeed support the new Bulldozer FX CPU's
-
Yes the will. currently there is only one of MB GA-880GM-USB3 (rev. 3.1) with the bios updated to except the FX CPU
also looking at the CPU support list it only supports FX-4100, FX-6100, FX8100.
-
Many thanks for the quick replys 8)
-
Many thanks for the quick replys 8)
Your welcome just for a update all 880g "SB710" have bios updates for FX only the 95watts cpu.
-
I'll have to wait, this 880 = 850 SB
-
I'm in the same boat, GA-880GMA-USB3 (rev. 3.1) currently using PH II 1055t
-
On the good side, 99% of the time Gigabyte has most of, if not all, the bugs worked out when new firmware is available. The bad = when......
-
F3 bios TODAY for FX support
-
F3 bios TODAY for FX support
Now GA-880GMA-USB3 supports
FX-4100, FX-6100, FX-8100
I think I'll wait til the new stepping for FX to be released then a new
motherboard 990 Mb. :-\
-
The comming revisions will be better - what I can say is the fx 6100 runs 11c cooler, at load, than the 955be it replaced. Not any where done with any of our "every day work" testing, so far so good. We shal see what we see ;D
-
Cool!
This is what I'm looking to upgrade to GIGABYTE GA-990FXA-UD3 which has for sale $149.99
at Amazon.plus I'll go with the FX-8150 or keep this board FX-6100
http://www.amazon.com/GIGABYTE-GA-990FXA-UD3-990FX-SATA-Motherboard/dp/B0055QYKQO/ref=pd_cp_e_3 (http://www.amazon.com/GIGABYTE-GA-990FXA-UD3-990FX-SATA-Motherboard/dp/B0055QYKQO/ref=pd_cp_e_3)
-
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128514, here too.... It's a great board. 8+2 power for an over clock.......
I know less than I knew yesterday about these FX chips. It's been a week, testing Asrock 880g w/710, this board is much smoother - best word I can think of. I like what I see - for cad it will render as fast as anything we have including the i7 920 ( I know it's not a 2600k ) BUT.....
I have a 64bit version of win 8 to fool with - I'm thinking, hoping, there will a little more I can learn.
If you use a 6100, please post your thoughts.
-
I read a post on gigabyte forum, FX cpu's are more targeted towards win 8 win 7 is twisting the
FX cpu instruction and they are hoping there will be a win 7 update fixing this problem. :o
-
The instruction is off. As the firmware improves this issue could go away or some kind of AMD software patch could do the trick. In the mean time the FX does some things very well.... with a little tweaking - we'll see 8)