Official GIGABYTE Forum

Questions about GIGABYTE products => Graphic cards => Topic started by: ivanex on November 15, 2011, 09:16:09 am

Title: GV-R6850OC-1GD No display
Post by: ivanex on November 15, 2011, 09:16:09 am

Ok my problem with my VGA is it work fine when i purchase and i start using for only few weeks until today i left my computer on and watch tv for 2 hour and came back with no display on my computer i have tried switching different graphic card and PCIE slot. my PSU is Consair 1000W.

Title: Re: GV-R6850OC-1GD No display
Post by: Dark Mantis on November 15, 2011, 08:59:31 pm

Hi

I suspect that it has something to do with the power saving or sleep modes. Can you get the machine to run now with a display ?

If not try clearing the CMOS by:

Remove the power cable from the mains supply and then press the power switch on the case for a few seconds just to drain any residual energy in the PSU capacitors.

Once done remove the motherboard battery for at least one hour before replacing it.
 
Next plug back into the mains supply and boot.
 
You will now need to enter the BIOS by pressing DEL and load Optimised BIOS Defaults.

Make any other changes to the BIOS settings to suit your self like disabling the floppy drive, disabling the full screen logo and making the HDD the primary boot device and then press F10 to save and exit.

Once done and hopefully with the system running again go into the BIOS and disable all the power saving and sleep modes that you can find. Save and exit  F10.