Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: alexxx on January 05, 2012, 07:58:10 pm
-
I would like to know before I buy new SSD and set it in RAID0, and other HARD drives who are connected in INTEL Controller in ATA Mode to-not-be removed. Can DO?
tnx
-
Hi alexxx, ;)
The best, it is install the SSD on ICH10R Sata Port.
The same things for HD Sata.
The Marvell GSata is slow and sometimes cause a little problem.
Gloup_Gloup
-
:O I get it
but my motherboard has 10 SataII ports by INTEL Controller and other 2 SataIII by Marvell. that what I want is: 2xSSD in RAID0 mode and other 3 HDD in IDE mode, can it work?
-
:O I get it
but my motherboard has 10 SataII ports by INTEL Controller and other 2 SataIII by Marvell. that what I want is: 2xSSD in RAID0 mode and other 3 HDD in IDE mode, can it work?
Hi alexxx, ;)
You said, I reformulate : You have a 3 hard disk IDE ? OR you have 3 Hard Disk SATA (type 2 or 3 ???) and you want it in BIOS, parameter IDE Mode in Onboard SATA-IDE Ctrl Mode?
Gloup_Gloup
-
for now I have 3 SATAII hard drives and 1 SSD III allone are under IDE Mode connected(there is no other way because they are different by size and by manufacter), now I want to buy one other SSD and set it in RAID0 with the oder SSD. I am not sure about the other drives, because in the Bios shall I chose RAID, If I set Raid Stripe to get the 2 SSDĀ“s in RAID0, what will happen with ther oder 3 HDDs, because for RAID0 needs 2 identical drives. Will they be recognized after launching the Windows?
-
Hi alexxx,
Now your situation is more clear. Good.
But I prefer then other member reply about your question.
Be patient. Another member come here... for help you.
Maybe just tomorrow... but sometimes check tonight.
In waiting time , use a Search TAB in forum Menu for find partial infos about your situation.
Why not?
Gloup_Gloup