Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: Arith on February 10, 2012, 02:40:54 pm
-
I tried to install express recovery 2 on GA 970A UD3 and although I left 100GB unallocated it instead partitioned my mobo dvd. The sata connections are optical drive first since this is my first boot device then sata 1-5 hdd's
How should it be connected? if that is what is wrong. :-\
-
Main hard drives first and last sata dvd drive. On mine i have in sata-0 my ssd then in sata-1 and -2 are my raided hard drives and in sata-3 my spare 500 gig movie and backup hard drive. Then in 4 and 5 are my sata dvd drives and no problems.
-
Cheers for that.
-
Agreed! Always best to have the boot drive on SATA_0 and set to AHCI mode if popssible and not in a RAID configuration. Then the optical drives on the slowest ports and set to IDE mode as some optical drives can play up when tried to run under AHCI.
-
Cheers for that, done now and working. ;D
-
Cool! +1 for autotech ;)
-
Doesnt happen often so yes it feels pretty good thank you for letting us know you have got it sorted if you have any other questions or comments please come back and post.